Skip to main content
Business LibreTexts

6.1: Calculate Predetermined Overhead and Total Cost under the Traditional Allocation Method

  • Page ID
    5214
  • Both roommates make valid points about allocating limited resources. Ultimately, each must decide which method to use to allocate time, and they can make that decision based on their own analyses. Similarly, businesses and other organizations must create an allocation system for assigning limited resources, such as overhead. Whereas Kamil and Barry are discussing the allocation of hours, the issue of allocating costs raises similar questions. For example, for a manufacturer allocating maintenance costs, which are an overhead cost, is it better to allocate to each production department equally by the number of machines that need to be maintained or by the square footage of space that needs to be maintained?

    In the past, overhead costs were typically allocated based on factors such as total direct labor hours, total direct labor costs, or total machine hours. This allocation process, often called the traditional allocation method, works most effectively when direct labor is a dominant component in production. However, many industries have evolved, primarily due to changes in technology, and their production processes have become more complicated, with more steps or components. Many of these industries have significantly reduced their use of direct labor and replaced it with technology, such as robotics or other machinery. For example, a mobile phone production facility in China replaced 90 percent of its workforce with robots.1

    In these situations, a direct cost (labor) has been replaced by an overhead cost (e.g., depreciation on equipment). Because of this decrease in reliance on labor and/or changes in the types of production complexity and methods, the traditional method of overhead allocation becomes less effective in certain production environments. To account for these changes in technology and production, many organizations today have adopted an overhead allocation method known as activity-based costing (ABC). This chapter will explain the transition to ABC and provide a foundation in its mechanics.

    Activity-based costing is an accounting method that recognizes the relationship between product costs and a production activity, such as the number of hours of engineering or design activity, the costs of the set up or preparation for the production of different products, or the costs of packaging different products after the production process is completed. Overhead costs are then allocated to production according to the use of that activity, such as the number of machine setups needed. In contrast, the traditional allocation method commonly uses cost drivers, such as direct labor or machine hours, as the single activity.

    Because of the use of multiple activities as cost drivers, ABC costing has advantages over the traditional allocation method, which assigns overhead using a single predetermined overhead rate. Those advantages come at a cost, both in resources and time, since additional information needs to be collected and analyzed. Chrysler, for instance, shifted its overhead allocation to ABC in 1991 and estimates that the benefits of cost savings, product improvement, and elimination of inefficiencies have been ten to twenty times greater than the investment in the program at some sites. It believes other sites experienced savings of fifty to one hundred times the cost to implement the system.2

    As you’ve learned, understanding the cost needed to manufacture a product is critical to making many management decisions (Figure \(\PageIndex{1}\)). Knowing the total and component costs of the product is necessary for price setting and for measuring the efficiency and effectiveness of the organization. Remember that product costs consist of direct materials, direct labor, and manufacturing overhead. It is relatively simple to understand each product’s direct material and direct labor cost, but it is more complicated to determine the overhead component of each product’s costs because there are a number of indirect and other costs to consider. A company’s manufacturing overhead costs are all costs other than direct material, direct labor, or selling and administrative costs. Once a company has determined the overhead, it must establish how to allocate the cost. This allocation can come in the form of the traditional overhead allocation method or activity-based costing..

    A picture of two jars of coins labeled “Product A” and “Product B.” Three uneven stacks of coins labeled “Direct Material, Direct Labor, and Factory Overhead” are going into each of the jars with arrows labeled “Actual.” The contents of the jars are labeled “Total costs.”
    Figure \(\PageIndex{1}\): Allocating Costs among Products. The total cost of a product is based on direct labor, direct material, and factory overhead costs. (attribution: Copyright Rice University, OpenStax, under CC BY-NC-SA 4.0 license)

    Component Categories under Traditional Allocation

    Traditional allocation involves the allocation of factory overhead to products based on the volume of production resources consumed, such as the amount of direct labor hours consumed, direct labor cost, or machine hours used. In order to perform the traditional method, it is also important to understand each of the involved cost components: direct materials, direct labor, and manufacturing overhead. Direct materials and direct labor are cost categories that are relatively easy to trace to a product. Direct material comprises the supplies used in manufacturing that can be traced directly to the product. Direct labor is the work used in manufacturing that can be directly traced to the product. Although the processes for tracing the costs differ, both job order costing and process costing trace the material and labor through materials requisition requests and time cards or electronic mechanisms for measuring labor input. Job order costing traces the costs directly to the product, and process costing traces the costs to the manufacturing department.

    ETHICAL CONSIDERATIONS: Ethical Cost Modeling

    The proper use of management accounting skills to model financial and non-financial data optimizes the organization’s evaluation and use of resources and assists in the proper evaluation of costs and revenues in an organization. The IFAC provides guidance on the use of cost models and how to ethically design proper cost models: “Cost models should be designed and maintained to reflect the cause-and-effect interrelationships and the behavioral dynamics of the way the organization functions. The information needs of decision makers at all levels of an organization should be taken into account, by incorporating an organization’s business and operational models, strategy, structure, and competitive environment.”3

    Estimated Total Manufacturing Overhead Costs

    The more challenging product component to track is manufacturing overhead. Overhead consists of indirect materials, indirect labor, and other costs closely associated with the manufacturing process but not tied to a specific product. Examples of other overhead costs include such items as depreciation on the factory machinery and insurance on the factory building. Indirect material comprises the supplies used in production that cannot be traced to an individual product, and indirect labor is the work done by employees not directly involved in the manufacturing process, such as the supervisors’ salaries or the maintenance staff’s wages. Because these costs cannot be traced directly to the product like direct costs are, they have to be allocated among all of the products produced and added, or applied, to the production and product cost.

    For example, the recipe for shea butter has easily identifiable quantities of shea nuts and other ingredients. Based on the manufacturing process, it is also easy to determine the direct labor cost. But determining the exact overhead costs is not easy, as the cost of electricity needed to dry, crush, and roast the nuts changes depending on the moisture content of the nuts upon arrival.

    Until now, you have learned to apply overhead to production based on a predetermined overhead rate typically using an activity base. An activity base is considered to be a primary driver of overhead costs, and traditionally, direct labor hours or machine hours were used for it. For example, a production facility that is fairly labor intensive would likely determine that the more labor hours worked, the higher the overhead will be. As a result, management would likely view labor hours as the activity base when applying overhead costs.

    A predetermined overhead rate is calculated at the start of the accounting period by dividing the estimated manufacturing overhead by the estimated activity base. The predetermined overhead rate is then applied to production to facilitate determining a standard cost for a product. This estimated overhead rate will allow a company to determine a cost for the product without having to wait, possibly several months, until all of the actual overhead costs are determined, and to help with issues such as seasonal production or variable overhead costs, such as utilities.

    Calculation of Predetermined Overhead and Total Cost under Traditional Allocation

    The predetermined overhead rate is set at the beginning of the year and is calculated as the estimated (budgeted) overhead costs for the year divided by the estimated (budgeted) level of activity for the year. This activity base is often direct labor hours, direct labor costs, or machine hours. Once a company determines the overhead rate, it determines the overhead rate per unit and adds the overhead per unit cost to the direct material and direct labor costs for the product to find the total cost.

    \[\text { Predetermined Overhead Rate }=\dfrac{\text { Estimated Overhead cost (s) }}{\text { Estimated Activity Base (units or s) }}\]

    To put this method into context, consider this example. Musicality Manufacturing developed a recording device similar to a microphone that allows musicians and music aficionados to record their playing or singing along with any song publicly available. There are three products that vary in features and ability: Solo, Band, and Orchestra. Musicality was started by musicians who majored in math and software engineering while in college. Their main concern was building a quality manufacturing plant, so they used the simpler traditional allocation method. They started by determining their direct costs, which are shown in Figure \(\PageIndex{2}\).

    Costs for Solo, Band, and Orchestra, respectively, for Direct Materials per unit are: $3.50, $6, $11.70. For Direct Labor Cost per Unit, they are: 10.00, 2.75, 4.30.
    Figure \(\PageIndex{2}\): Material and Labor Costs for Musicality. (attribution: Copyright Rice University, OpenStax, under CC BY-NC-SA 4.0 license)

    Musicality determines the overhead rate based on direct labor hours. At the beginning of the year, the company estimates total overhead costs to be \(\$2,500,000\) and total direct labor hours to be \(1,250,000\). The predetermined overhead rate is

    \[\dfrac{\$ 2,500,000 \text { overhead }}{1,250,000 \text { labor hours }}=\$ 2.00 \text { per labor hour } \nonumber \]

    Musicality uses this information to determine the cost of each product. For example, the total direct labor hours estimated for the solo product is \(350,000\) direct labor hours. With \(\$2.00\) of overhead per direct hour, the Solo product is estimated to have \(\$700,000\) of overhead applied. When the \(\$700,000\) of overhead applied is divided by the estimated production of \(140,000\) units of the Solo product, the estimated overhead per product for the Solo product is \(\$5.00\) per unit. The computation of the overhead cost per unit for all of the products is shown in Figure \(\PageIndex{3}\).

    Computation of overhead per unit for Solo, Band, Orchestra, and total, respectively. Direct Labor Hours per Product: 350,000, 400,000, 500,000, 1,250,000. Times Overhead Rate per Direct Labor Hour: $2.00 for all columns. Equals Overhead Assigned per Product: $700,000, $800,000, $1,000,000, $2,500,000. Divide by the Number of Units: 140,000, 100,000, 250,000, 490,000. Equals Overhead per Unit: $5, $8, $4.
    Figure \(\PageIndex{3}\): Musicality’s Overhead per Unit Using Traditional Allocation. (attribution: Copyright Rice University, OpenStax, under CC BY-NC-SA 4.0 license)

    The overhead cost per unit from Figure \(\PageIndex{3}\) is combined with the direct material and direct labor costs as shown in Figure \(\PageIndex{2}\) to compute the total cost per unit as shown in Figure \(\PageIndex{4}\).

    Cost per unit is computed for Solo, Band, and Orchestra, respectively. Direct Materials per Unit: $3.50, $6.00, $11.70. Direct Labor per Unit 10.00, 2.75, 4.30. Overhead per unit: $5.00, $8.00, $4.00. Added for a total of $18.50, $16.75, $20.00.
    Figure \(\PageIndex{4}\): Musicality’s Product Costs Using Traditional Allocation. (attribution: Copyright Rice University, OpenStax, under CC BY-NC-SA 4.0 license)

    After reviewing the product cost and consulting with the marketing department, the sales prices were set. The sales price, cost of each product, and resulting gross profit are shown in Figure \(\PageIndex{5}\).

    Gross profit is calculated for Solo, Band, and Orchestra, respectively. Sales Price: $20.00, $25.00, $30.00. Minus Cost per Unit (traditional): 18.50, 16.75, 20.00. Equals Gross Profit per Unit: $1.50, $8.25, $10.00.
    Figure \(\PageIndex{5}\): Musicality’s Gross Profit per Unit Using Traditional Allocation. (attribution: Copyright Rice University, OpenStax, under CC BY-NC-SA 4.0 license)

    Sales of each product have been strong, and the total gross profit for each product is shown in Figure \(\PageIndex{6}\). Using the Solo product as an example, \(150,000\) units are sold at a price of \(\$20\) per unit resulting in sales of \(\$3,000,000\). The cost of goods sold consists of direct materials of \(\$3.50\) per unit, direct labor of \(\$10\) per unit, and manufacturing overhead of \(\$5.00\) per unit. With \(150,000\) units, the direct material cost is \(\$525,000\); the direct labor cost is \(\$1,500,000\); and the manufacturing overhead applied is \(\$750,000\) for a total Cost of Goods Sold of \(\$2,775,000\). The resulting Gross Profit is \(\$225,000\) or \(\$1.50\) per unit.

    Calculation of Total Gross Profit for Solo, Band, Orchestra, and Total, respectively. Number of Units Sold: 150,000, 110,000, 200,000, 460,000. Sales: $3,000,000, $2,750,000, $6,000,000, $11,750,000. Less Cost of Goods Sold. Direct Material: 525,000, 660,000, 2,340,000, 3,525,000. Direct Labor: 1,500,000, 302,500, 860,000, 2,662,500. Manufacturing Overhead: 750,000, 880,000, 800,000, 2,430,000. Cost of Goods Sold: 2,775,000, 1,842,500, 4,000,000, 8,617,500. Gross Profit: $225,000, $907,500, $2,000,000, $3,132,500.
    Figure \(\PageIndex{6}\): Musicality’s Gross Profit by Product Line Using Traditional Allocation. (attribution: Copyright Rice University, OpenStax, under CC BY-NC-SA 4.0 license)

    THINK IT THROUGH: Computing Actual Overhead Costs

    As manufacturing technology becomes less expensive and more efficient, the mix between overhead and labor changes so that tasks are more computerized tasks and involve less direct labor; the traditional use of direct labor hours or direct labor dollars changes accordingly. If the predetermined overhead rate is based on direct labor hours and set at the beginning of the year but manufacturing technology leads to a reduction in direct labor during the year, the number of direct labor hours may be less than estimated. This reduces the amount of overhead applied so that the overhead is more likely to be underapplied at the end of the year. Why do companies not wait until the end of the period and compute an actual overhead rate based on actual manufacturing costs and actual units?

    Footnotes

    1. June Javelosa and Kristin Houser. “This Company Replaced 90% of Its Workforce with Machines. Here’s What Happened.” Futurism / World Economic Forum. https://www.weforum.org/agenda/2017/...ctivity-soared
    2. Joseph H. Ness and Thomas G. Cucuzza. “Tapping the Full Potential of ABC.” Harvard Business Review. July-Aug. 1995. https://hbr.org/1995/07/tapping-the-...tential-of-abc
    3. International Federation of Accountings (IFAC) PAIB Committee. “Evaluating and Improving Costing in Organizations.” International Good Practice Guidance. June 30, 2009. https://www.ifac.org/system/files/pu...-July-2009.pdf