Skip to main content
Business LibreTexts

4.5: Compute the Cost of a Job Using Job Order Costing

  • Page ID
  • To summarize the job order cost system, the cost of each job includes direct materials, direct labor, and manufacturing overhead. While the product is in production, the direct materials and direct labor costs are included in the work in process inventory. The direct materials are requested by the production department, and the direct material cost is directly attached to each individual job, as the materials are released from raw materials inventory. The cost of direct labor is recorded by the employees and assigned to each individual job. When the allocation base is known, usually when the product is completed, the overhead is allocated to the product on the basis of the predetermined overhead rate.


    The construction industry typically uses job order costing and accounts for its costing in a manner similar to the businesses profiled in this chapter.

    Determining the Costs of an Individual Job Using Job Order Costing

    When a job is completed, the costs of the job—the direct materials, direct labor, and manufacturing overhead—are totaled on the job cost sheet, and the total amount is transferred to finished goods at the same time the product is transferred, either physically or legally, such as in the case of a home built by a contractor. Finally, when the product is sold, the sale is recorded at the sale price, while the cost is transferred from finished goods inventory to the cost of goods sold expense account. Figure \(\PageIndex{1}\) shows the flow of costs from raw materials inventory to cost of goods sold.

    Pictures of Raw Materials Inventory (rolls of vinyl), Work in Process (an employee creating a sign), Finished Goods Inventory (stacks of signs), Cost of Goods Sold (an installed sign).
    Figure \(\PageIndex{1}\): Flow of Costs during Production and Ultimate Sale or Transfer of Ownership. (credit “Raw Materials Inventory,” “Work in Process Inventory,” “Finished Goods Inventory”: modifications of “160810-F-UY190-027.JPG,” “160810-F-UY190-073.JPG,” and “160810-F-UY190-105.JPG” by Jessica Weissman, Minot Air Force Base Public Affairs, Public Domain; credit Cost of Goods Sold”: “Rustic Sign” by Grace Byrd/Flickr, CC BY 2.0)

    At all points in the process, the work in process should include the cost of direct materials and direct labor. When the job is completed and overhead assigned, the overhead allocation increases the cost of the work in process inventory. The cost of each individual job is maintained on a job cost sheet, and the total of all the work in process job cost sheets equals the work in process inventory and the statement of cost of goods manufactured, as you have learned.

    A job cost sheet is a subsidiary ledger that identifies the individual costs for each job. Figure \(\PageIndex{2}\) shows the job cost sheet for Job MAC001.

    A Job Cost Sheet. Headings are JOB COST SHEET, Dinosaur Vinyl, Inc. Identifying information is Job No.: 5416, Customer: Macs & Cheese, Units Ordered: 1, Customer No.: 2501723, Date Started: Dec. 22, 2018, Date Completed: Feb. 22, 2019 Costs are shown in 4 columns: Cost classifications, Units, Cost per Unit, and Amount. Direct Materials Costs are: Vinyl, 1, 300, 300; Black printing ink 2, 50, 100; Red printing ink 1, 60, 60; Gold printing ink 1, 60, 60; Grommets 12, 10, 120; Framing wood 40, 1.50, 60; for a total Direct materials of $700. Direct Labor Costs are: Material Handler 1, 15, 15; Print Technician 1, 15, 15; Production Assistants 2, 18, 36; for a total Direct Labor Cost of 66. Manufacturing Overhead Allocation Base: Direct Labor Cost. Base Units 66, Rate is $1.50 for a total overhead allocation of $165. Total job cost is $931.Total Revenue is $2000.
    Figure \(\PageIndex{2}\): Job Cost Sheet for Job MAC001. (attribution: Copyright Rice University, OpenStax, under CC BY-NC-SA 4.0 license)

    Sample Cost Information for Dinosaur Vinyl

    Dinosaur Vinyl worked on three jobs during the month: POR143, MAC001, and TRJ441, and a fourth Job SWM505 had been finished and moved to the finished goods inventory account during the previous month.

    At the beginning of the month, the company had a beginning raw materials inventory balance of \(\$2,500\), and during the month, it purchased an additional \(\$10,500\), giving it a total of \(\$13,000\) in raw materials available for use in production.

    The following example will examine four different production jobs. Each of the four will be at beginning stages at either the beginning of the current month or the end of the current month.

    1. Job POR 143: This job was the only work in process inventory at the beginning of the current month, and it had \(\$1,000\) in direct material costs, and \(\$0\) of direct labor costs already allocated to the work in process inventory. During the current month, additional direct materials of \(\$200\) and direct labor of \(\$150\) were added to POR143. An overhead cost of \(\$375\) was applied to POR143 at the predetermined overhead rate of \(\$2.50\) per direct labor dollar. It was finished during the month and transferred to the finished goods inventory. The sale was not finalized during the month, so it continues to be part of the finished goods inventory.
    2. Job MAC 001: This job was started and completed during the month. Since the job began in and was completed in the same month, there was no beginning balance in the work in process inventory. During the month it incurred \(\$700\) in direct materials costs, \(\$66\) in direct labor, and \(\$165\) of overhead applied to the job before it was transferred to the finished goods inventory upon completion. The sale was finalized during the month at a sale price of \(\$2,000\), so the costs were transferred from finished goods inventory to cost of goods sold.
    3. Job TRJ441: This job was started during the current month. Its costs consist of \(\$500\) in direct material cost, \(\$150\) in direct labor expenses, and \(\$375\) in applied overhead. The job remains in the work in process inventory awaiting assembly.
    4. Job SWM505: At the beginning of the month, this job was completed and already in the finished goods inventory at a cost of \(\$1,531\). Since it was completed, it did not incur any additional costs in the current month. It was sold during the month for \(\$3,500\), and the costs were transferred from the finished goods inventory to cost of goods sold.

    The cost of raw materials used is calculated as shown:

    Chart showing Raw Materials cost calculation. Beginning Raw Materials Inventory $2,500 plus Purchases of 10,500 equals Material Available for Use of 13,000. Then subtract Ending Raw Materials Inventory of 11,600 to find the Materials Used in Production of $1,400.
    Figure \(\PageIndex{3}\): The cost of raw materials calculation

    The individual job cost sheets show the \(\$1,400\) worth of materials used in production:

    Chart showing Raw Materials cost for each job. POR143 $200, MAC001 700, TJR441 500, for a total of $1,400.
    Figure \(\PageIndex{4}\): Individual job cost sheets showing the worth of materials used in production

    The cost of goods manufactured is accounted for as shown:

    A chart showing the calculation of Cost of Goods Manufactured for jobs POR143, MAC001, TJR441 and the Total. Respectively: Materials added are $200, $700, $500, and $1400; Labor added is 150, 66, 150, and 366; Overhead applied is 375, 165, 375, and 915; for Total added during the month of $725, $931, $1,025, and $2,681. Calculation is Beginning WIP Inventory of $1,000, $0, $0, and $1,000; Material, Labor, and Overhead added is 725, 931, 1,025, and 2,681; Equaling Manufacturing costs incurred of 1,725, 931, 1,025, and 3,681. Subtract Ending WIP Inventory of 0, 0, 1,025, and 1,025; Equaling Cost of Goods Manufactured of $1,725, $931, $0, and $2,656.
    Figure \(\PageIndex{5}\): The cost of goods manufactured accounted for

    Notice the costs for Job TJR441 are included in the work in process inventory, whereas the costs for POR143 and MAC001 were transferred to the cost of goods manufactured. The costs of the jobs transferred are shown in the cost of goods sold and the finished goods inventory:

    Chart showing Cost of Goods Sold for SWM505 POR143, MAC001, TJR441, and the Total. Respectively the dollar figures are: Beginning Finished Goods Inventory 1,531, 0, 0, 0, 1,531; plus Cost of Goods Manufactured 0, 1,725, 931, 0, 2,656; equaling Goods Available for Sale 1,531, 1,725, 931, 0, 4,187. Then subtract Ending Finished Goods Inventory of 0, 1,725, 0, 0, and 1,725 to get Cost of Goods Sold of 1,531, 0, 931, 0, and 2,462.
    Figure \(\PageIndex{6}\): The finished goods inventory

    Mechanics of Job Order Costing for Dinosaur Vinyl

    The amounts in raw materials, work in process, and finished goods inventories compose the total cost for each account, whereas the job cost sheets contain the costs for each individual job. A summary of the jobs for Dinosaur Vinyl is given in Figure \(\PageIndex{7}\).

    Chart showing a summary of the Jobs: SWM505, POR143, MAC001, TJR441, and Total. Beginning Balance $1,531, 1,000, 0, 0, 2,531 (which is the Beginning WIP for the company) plus Direct Materials 0, 200, 700, 500, and 1,400 plus Direct Labor 0, 150, 66, 150, 366 plus Overhead applied 0, 375, 165, 375, and 915 equals total cost of 1,531, 1,725, 931, 1,025, and 5,212 (which is Total for WIP, FG, and CGS) Status is Sold, Finished, Sold, and Unfinished, Final account location is Cost of Goods Sold, Finished Goods Inventory, cost of Goods Sold, and WIP Inventory.
    Figure \(\PageIndex{7}\): Summary of Dinosaur Vinyl’s Jobs during the Year. (attribution: Copyright Rice University, OpenStax, under CC BY-NC-SA 4.0 license)

    THINK IT THROUGH: Allocating Costs

    A manufacturing company has incurred these costs:

    Figure showing costs: Purchase raw materials inventory $15,000, Issue raw materials inventory to Job A 3,000, Factory wage expense incurred 23,000, Factory wage allocated to Job A 2,000, Factory wage allocated to overhead 500, Manufacturing overhead incurred 7,500, Manufacturing overhead allocated to Job A 1,000.
    Figure \(\PageIndex{8}\): Costs incurred by a manufacturing company

    What is the cost allocated to Job A? For any costs not used, explain why they are not used.